Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls - the norm rather than the exception in real recoveries.
- For steel cable only - do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
Universal Winch Mounting Plate for Grizzly 9500 – 13000 lbs
Steel mounting plate for Grizzly winches from 9500 to 13000 lbs. At these capacities the mounting is what fails first if it is under-engineered - the plate spreads the load across the chassis rails so the pull is carried by the vehicle structure, not by bumper brackets.
- Rated for the heavier 9500-13000 lbs Grizzly winches
- Spreads pulling load across the chassis
- Steel construction
Red Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Anodised red aluminium hawse fairlead for winches running synthetic rope. The polished radius guides the rope onto the drum from any angle without the sharp edges or pinch points that shred synthetic line - which is exactly why roller fairleads must never be used with rope.
- Synthetic rope only - never fit synthetic rope to a roller fairlead
- Machined aluminium with a smooth radiused throat
- Red anodised finish
OFM4X4 Air Compressor 160L/min 12V – 150 PSI for 35″+ Tyres
A high-volume 12V compressor built for large off-road tyres. At 160 L/min it will re-inflate a set of 35-inch tyres in a realistic amount of time, where a small emergency pump would still be running an hour later.
- Airflow: 160 L/min
- Power supply: 12V DC, permanent magnet motor
- Current consumption: 40 A
- Maximum pressure: 150 PSI / 10 bar (120 PSI / 8 bar operating)
OFM4X4 Complete 4×4 Recovery Kit – Shackles, Snatch Block, Strap & Rope
Complete OFM4X4 recovery kit in a carry bag: two rated bow shackles, an 8 t snatch block, a 9 m towing rope, a 3 m tree saver strap and heavy-duty gloves.
- 2 x rated bow shackles (3.25 t and 4.75 t)
- 8 t snatch block pulley
- 9 m x 60 mm towing rope, 8 t
- 3 m x 75 mm tree saver strap, 12 t
- Heavy-duty gloves
Wheel Spacer 30mm 6×139.7 M12x1.25 CB110 – Nissan, Ford
Off-Road Steel Wheel 16x7J 6×114.3 ET0 CB66.1 – Navara D40 D23
Off-Road Steel Wheel 16x7J 6×139.7 ET+10 CB67.1 – Pajero V60 V80 V90
Off-Road Steel Wheel 16x7J 5×114.3 ET+30 CB66.1 – Dacia Duster
Off-Road Steel Wheel 16x8J 5×165.1 ET-25 CB113 – Land Rover
