Universal Winch Mounting Plate for Grizzly 8500 lbs
Steel mounting plate for Grizzly 8500 lbs winches. A winch is only as strong as what it is bolted to: the plate spreads the pulling load across the chassis rails instead of concentrating it on a bumper, which is what bends bumpers and tears out mounting bolts.
- Spreads winch load across the chassis rather than the bumper
- Drilled for the 8500 lbs Grizzly bolt pattern
- Steel construction
Clutch for Grizzly Winch – 8500 / 9500 / 13000 lbs
Control Box Cover for Grizzly Winch – 8500 / 9500 / 13000 lbs
Replacement cover for the Grizzly winch control box. The cover is all that stands between the contactors and the mud, salt and standing water thrown up at bumper height, so a cracked or missing one leads directly to the corrosion that kills control boxes.
- Protects contactors from water, mud and road salt
- Direct replacement for a cracked or lost cover
- Cheap insurance against control box failure
Complete Control Box for Grizzly Winch – 8500 / 9500 / 13000 lbs
Complete replacement control box for Grizzly electric winches, supplied with the contactors and wiring already assembled. The control box is where water and corrosion do most of their damage: when a winch runs one way but not the other, or clicks without turning, a failed contactor inside this box is the usual cause.
- Complete assembled unit - contactors, wiring and housing
- Fixes the classic "runs one way only" winch fault
- Accepts both corded and wireless remote handsets
Gearbox Support for Grizzly Winch – 8500 / 9500 / 13000 lbs
Replacement gearbox end support for Grizzly electric winches. This casting locates the planetary gearbox and carries the drum bearing at that end, so any play or damage here shows up immediately as drum wobble and uneven rope winding.
- Locates the planetary gearbox and drum bearing
- Original-specification replacement part
- Cures drum wobble caused by a worn or damaged support
Grizzly Winch Corded Remote Control – 8500 / 9500 / 13000 lbs
Wired remote handset for Grizzly electric winches. A corded remote has no battery to go flat and no pairing to lose, which is why most operators keep one in the vehicle as a backup even when they normally use the wireless handset.
- Plugs directly into the winch control box
- No batteries and no radio pairing required
- Reliable backup if the wireless remote fails in the field
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset
