Grizzly Electric Winch 13,500 lbs 12V 150:1 – Synthetic Rope
439,00 €
Grizzly 13,500 lbs (6,123 kg) 12V electric recovery winch with a 150:1 planetary gearbox and synthetic rope.
- Capacity: 13,500 lbs (6,123 kg)
- Motor: 6.8 HP (5.2 kW)
- Rope: 25 m x Ø 10 mm
- Gear ratio: 150:1
Out of stock
Grizzly 13,500 lbs 12V electric winch
This 13,500 lbs 12V winch is sized for full-size 4x4s and heavily loaded pick-ups. It ships with synthetic rope, so it is lighter to handle and far safer if the line ever fails.
Technical specification
- Pulling capacity: 13,500 lbs (6,123 kg)
- Synthetic rope: 25 m x Ø 10 mm
- Motor: 6.8 HP (5.2 kW)
- Voltage: 12V
- Gearbox: 3-Stage Planetary Gear
- Gear ratio: 150:1
- Clutch: Manual Engage/Disengage
- Brake: Automatic
- Fairlead: Aluminum Hawse
- Control box: Fixed Position (Central)
- Dimensions: 623 mm x 174 mm x 222 mm
- Mounting bolt pattern: 254 mm x 114.3 mm
- Maximum line load: 6,123 kg
- Winch weight: 29 kg
Rope and fairlead
Synthetic rope stores almost no energy under tension, so if the line does part it drops rather than whipping back – a decisive safety advantage over steel. It is also light enough to pull out by hand and will not develop the sharp broken strands that make old steel cable dangerous to handle. Use it only with a hawse fairlead and keep it clear of hot surfaces.
Fitting
Mounting bolt pattern is 254 mm x 114.3 mm, so it fits winch plates and bumpers cut to that pattern. Feed the winch from the battery with correctly rated cable and a suitable isolator, and make sure the mounting plate is tied into the chassis rather than the bumper skin alone.
Operating advice
- Rig a snatch block for heavy or angled pulls – it roughly halves the load on the winch and the anchor
- Winch in short bursts and let the motor cool between pulls
- Keep at least five wraps of line on the drum at all times
- Never use a recovery winch to lift or suspend a load
| Weight | 29 kg |
|---|---|
| Dimensions | 62,3 × 17,4 × 22,2 cm |
| Brand | Grizzly Winch |
| Line Type | Synthetic Rope |
| Voltage | 12V |
| Gear Ratio | 150:1 |
| Pulling Capacity | 13500 lbs (6123 kg) |
| Motor Power | 6.8 HP |
| Length | 25 m |
| Line Diameter | 10 mm |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls - the norm rather than the exception in real recoveries.
- For steel cable only - do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
Red Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Anodised red aluminium hawse fairlead for winches running synthetic rope. The polished radius guides the rope onto the drum from any angle without the sharp edges or pinch points that shred synthetic line - which is exactly why roller fairleads must never be used with rope.
- Synthetic rope only - never fit synthetic rope to a roller fairlead
- Machined aluminium with a smooth radiused throat
- Red anodised finish
Complete Control Box for Grizzly Winch – 8500 / 9500 / 13000 lbs
Complete replacement control box for Grizzly electric winches, supplied with the contactors and wiring already assembled. The control box is where water and corrosion do most of their damage: when a winch runs one way but not the other, or clicks without turning, a failed contactor inside this box is the usual cause.
- Complete assembled unit - contactors, wiring and housing
- Fixes the classic "runs one way only" winch fault
- Accepts both corded and wireless remote handsets
Air Clutch Lever for Grizzly Winch
Replacement air-actuated clutch lever for Grizzly electric winches. The clutch disengages the drum from the gearbox so rope can be pulled out freely by hand - the first step of almost every recovery, and a part that gets knocked and corroded more than most.
- Engages and disengages the drum from the gearbox
- Air actuated - no need to reach into the bumper
- Original-specification replacement
Gearbox Support for Grizzly Winch – 8500 / 9500 / 13000 lbs
Replacement gearbox end support for Grizzly electric winches. This casting locates the planetary gearbox and carries the drum bearing at that end, so any play or damage here shows up immediately as drum wobble and uneven rope winding.
- Locates the planetary gearbox and drum bearing
- Original-specification replacement part
- Cures drum wobble caused by a worn or damaged support
Grizzly Winch Corded Remote Control – 8500 / 9500 / 13000 lbs
Wired remote handset for Grizzly electric winches. A corded remote has no battery to go flat and no pairing to lose, which is why most operators keep one in the vehicle as a backup even when they normally use the wireless handset.
- Plugs directly into the winch control box
- No batteries and no radio pairing required
- Reliable backup if the wireless remote fails in the field
OFM4X4 Synthetic Winch Rope 6mm x 28m with Hook – Gray, 3200 kg
OFM4X4 Synthetic Winch Rope 10mm x 28m with Hook – Blue, 10,500 kg
10 mm x 28 m UHMWPE synthetic winch rope with hook, in blue. Six times lighter than steel cable, far safer if it fails, and easy to pull out to an anchor by hand.
- Size: 10 mm x 28 m
- Strength: 10,500 kg
- For winches: For Auto Off-Road winches with a capacity of 9,500–13,000 lbs
- Hook: Included
Use with a hawse fairlead only.







Reviews
There are no reviews yet.