Hexagonal Drive Shaft for Grizzly Winch – 9500 / 13000 lbs
2,00 €
Replacement hexagonal drive shaft for Grizzly electric winches. This shaft carries drive from the motor through the drum to the planetary gearbox.
- Transfers drive from the motor to the planetary gear set
- Inexpensive part that protects the gearbox
- Original-specification replacement
In stock
Hexagonal drive shaft for Grizzly winches
Replacement hexagonal drive shaft for Grizzly electric winches. This shaft carries drive from the motor through the drum to the planetary gearbox. It is deliberately the cheapest part in the driveline, and rounding or twisting one under an extreme load is far preferable to stripping the gearbox.
Key points
- Transfers drive from the motor to the planetary gear set
- Inexpensive part that protects the gearbox
- Original-specification replacement
- Worth carrying as a trail spare
Compatibility
Grizzly electric winches rated 9500 lbs and 13000 lbs.
Specification
- Part: Hexagonal Drive Shaft for Grizzly Winch – 9500 / 13000 lbs
- Weight: 0.1 kg
| Weight | 0,1 kg |
|---|
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Universal Winch Mounting Plate for Grizzly 8500 lbs
Steel mounting plate for Grizzly 8500 lbs winches. A winch is only as strong as what it is bolted to: the plate spreads the pulling load across the chassis rails instead of concentrating it on a bumper, which is what bends bumpers and tears out mounting bolts.
- Spreads winch load across the chassis rather than the bumper
- Drilled for the 8500 lbs Grizzly bolt pattern
- Steel construction
Control Box Cover for Grizzly Winch – 8500 / 9500 / 13000 lbs
Replacement cover for the Grizzly winch control box. The cover is all that stands between the contactors and the mud, salt and standing water thrown up at bumper height, so a cracked or missing one leads directly to the corrosion that kills control boxes.
- Protects contactors from water, mud and road salt
- Direct replacement for a cracked or lost cover
- Cheap insurance against control box failure
Air Clutch Lever for Grizzly Winch
Replacement air-actuated clutch lever for Grizzly electric winches. The clutch disengages the drum from the gearbox so rope can be pulled out freely by hand - the first step of almost every recovery, and a part that gets knocked and corroded more than most.
- Engages and disengages the drum from the gearbox
- Air actuated - no need to reach into the bumper
- Original-specification replacement
Gearbox Support for Grizzly Winch – 8500 / 9500 / 13000 lbs
Replacement gearbox end support for Grizzly electric winches. This casting locates the planetary gearbox and carries the drum bearing at that end, so any play or damage here shows up immediately as drum wobble and uneven rope winding.
- Locates the planetary gearbox and drum bearing
- Original-specification replacement part
- Cures drum wobble caused by a worn or damaged support
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset
