Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
19,00 €
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only – not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
In stock
Aluminium hawse fairlead, 254 mm centres
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
Key points
- Synthetic rope only – not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
- Recommended for winches from 9000 lbs to 14000 lbs
- Mounting hole centres: 25 cm (254 mm)
Compatibility
Winches with 254 mm mounting hole centres, rated 9000-14000 lbs.
Important: This fairlead is for synthetic rope only. Steel cable will quickly cut into the aluminium throat.
Specification
- Part: Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
- Weight: 1 kg
| Weight | 1 kg |
|---|---|
| Brand | OFM4X4 |
| Product Type | Hawse Fairlead |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls - the norm rather than the exception in real recoveries.
- For steel cable only - do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
Grizzly Winch Motor – 12V Replacement Series Wound Motor
Replacement 12V series-wound motor for Grizzly electric winches. Winch motors are the component most often killed by long pulls without a cooling break - brushes wear, the armature overheats and pulling power falls away.
- 12V series-wound motor, original specification
- Restores full pulling power on a tired winch
- Far cheaper than replacing a complete winch
Crossmember Support for Grizzly Winch – 9500 / 13000 lbs
Replacement crossmember support for Grizzly electric winches. The crossmember ties the motor end and gearbox end of the winch together and carries a share of the pulling load into the mounting plate, so a bent or cracked one should be replaced rather than straightened.
- Original-specification replacement part
- Ties the motor and gearbox housings together
- Transfers pulling load into the winch mounting plate
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset
Reviews
There are no reviews yet.