Grizzly Electric Winch 8,500 lbs 12V 150:1 – Synthetic Rope
325,00 €
Grizzly 8,500 lbs (3,855 kg) 12V electric recovery winch with a 150:1 planetary gearbox and synthetic rope.
- Capacity: 8,500 lbs (3,855 kg)
- Motor: 5.2 HP (3.9 kW)
- Rope: 18 m x Ø 8 mm
- Gear ratio: 150:1
- Remote: Wired and Wireless
Out of stock
Grizzly 8,500 lbs 12V electric winch
Grizzly’s 8,500 lbs electric winch pairs a 5.2 HP (3.9 kW) series-wound motor with a 150:1 planetary reduction. That combination gives the low-speed grunt needed to drag a bogged vehicle out under full load, not just the headline figure on a straight pull.
Technical specification
- Pulling capacity: 8,500 lbs (3,855 kg)
- Synthetic rope: 18 m x Ø 8 mm
- Motor: 5.2 HP (3.9 kW)
- Voltage: 12V
- Gearbox: 3-Stage Planetary Gear
- Gear ratio: 150:1
- Clutch: Manual Engage/Disengage
- Brake: Automatic
- Fairlead: Aluminum Hawse
- Remote control: Wired and Wireless
- Control box: Fixed Position (Central)
- Dimensions: 435 mm x 162 mm x 185 mm
- Mounting bolt pattern: 165 mm x 114.3 mm
- Maximum line load: 3,630 kg
- Winch weight: 23 kg
Rope and fairlead
Synthetic rope stores almost no energy under tension, so if the line does part it drops rather than whipping back – a decisive safety advantage over steel. It is also light enough to pull out by hand and will not develop the sharp broken strands that make old steel cable dangerous to handle. Use it only with a hawse fairlead and keep it clear of hot surfaces.
Fitting
Mounting bolt pattern is 165 mm x 114.3 mm, so it fits winch plates and bumpers cut to that pattern. Feed the winch from the battery with correctly rated cable and a suitable isolator, and make sure the mounting plate is tied into the chassis rather than the bumper skin alone.
Operating advice
- Rig a snatch block for heavy or angled pulls – it roughly halves the load on the winch and the anchor
- Winch in short bursts and let the motor cool between pulls
- Keep at least five wraps of line on the drum at all times
- Never use a recovery winch to lift or suspend a load
| Weight | 24 kg |
|---|---|
| Dimensions | 43,5 × 16,2 × 18,5 cm |
| Brand | Grizzly Winch |
| Line Type | Synthetic Rope |
| Voltage | 12V |
| Gear Ratio | 150:1 |
| Pulling Capacity | 8500 lbs (3855 kg) |
| Motor Power | 5.2 HP |
| Length | 18 m |
| Line Diameter | 8 mm |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls - the norm rather than the exception in real recoveries.
- For steel cable only - do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
Red Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Anodised red aluminium hawse fairlead for winches running synthetic rope. The polished radius guides the rope onto the drum from any angle without the sharp edges or pinch points that shred synthetic line - which is exactly why roller fairleads must never be used with rope.
- Synthetic rope only - never fit synthetic rope to a roller fairlead
- Machined aluminium with a smooth radiused throat
- Red anodised finish
Universal Winch Mounting Plate for Grizzly 8500 lbs
Steel mounting plate for Grizzly 8500 lbs winches. A winch is only as strong as what it is bolted to: the plate spreads the pulling load across the chassis rails instead of concentrating it on a bumper, which is what bends bumpers and tears out mounting bolts.
- Spreads winch load across the chassis rather than the bumper
- Drilled for the 8500 lbs Grizzly bolt pattern
- Steel construction
Grizzly Winch Motor – 12V Replacement Series Wound Motor
Replacement 12V series-wound motor for Grizzly electric winches. Winch motors are the component most often killed by long pulls without a cooling break - brushes wear, the armature overheats and pulling power falls away.
- 12V series-wound motor, original specification
- Restores full pulling power on a tired winch
- Far cheaper than replacing a complete winch
Crossmember Support for Grizzly Winch – 9500 / 13000 lbs
Replacement crossmember support for Grizzly electric winches. The crossmember ties the motor end and gearbox end of the winch together and carries a share of the pulling load into the mounting plate, so a bent or cracked one should be replaced rather than straightened.
- Original-specification replacement part
- Ties the motor and gearbox housings together
- Transfers pulling load into the winch mounting plate
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset
Reviews
There are no reviews yet.