Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
19,00 €
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls – the norm rather than the exception in real recoveries.
- For steel cable only – do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Four-way roller fairlead for steel winch cable
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls – the norm rather than the exception in real recoveries.
Key points
- For steel cable only – do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
- Recommended for winches from 9000 lbs to 17000 lbs
- Mounting hole centres: 254 mm
- Overall dimensions: 298 x 125 x 88 mm
Compatibility
Winches with 254 mm mounting hole centres, rated 9000-17000 lbs.
Important: Use with steel cable only. Synthetic rope will be cut by the roller ends and must run through a hawse fairlead instead.
Specification
- Part: Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
- Weight: 3 kg
| Weight | 3 kg |
|---|---|
| Dimensions | 29,8 × 12,5 × 8,8 cm |
| Brand | OFM4X4 |
| Product Type | Roller Fairlead |
Products that are in stock and listed on ofm4x4.com are delivered by express courier to the address you specify, to mainland addresses in the European Union countries available for selection at checkout. We do not currently deliver to islands or to countries outside the European Union.
Deliveries are currently made by DHL. The courier is chosen by the seller, who may change the courier delivering your order at any time.
The delivery cost is shown in the cart and at checkout once the delivery address has been confirmed. When your order is processed, we will confirm the delivery charge. If the courier or the charge has to be changed, we will tell you the new charge before dispatch; if you do not agree with it, you may cancel the order and receive a full refund.
In-stock products are normally delivered within 3–5 working days of order confirmation, depending on the destination country. You will receive a tracking number when your order is dispatched.
For products that are not in stock, the delivery time will be communicated by OFM4X4 staff when the order is processed.
Parcels are delivered during the courier's normal working hours, depending on the courier's route. We cannot guarantee a fixed delivery time.
The delivery time given when the order is confirmed is an estimate, and delays caused by the courier may occur.
We may delay or cancel a delivery if we are unable to fulfil the order for reasons beyond our control, caused either by a third party or by force majeure. In that case we will inform you and refund any amount already paid for products that cannot be delivered.
If we do not deliver the products within the delivery period communicated to you and you choose to cancel the order, we will refund all sums paid under the contract without undue delay, and in any case within 14 days of the date on which you informed us of your decision to terminate the contract.
We pack all products appropriately for transport.
The risk of loss of or damage to the products passes to you when you, or a third party indicated by you other than the carrier, take physical possession of the products.
Ownership of the products passes to you on delivery, provided the price has been paid.
If a parcel cannot be delivered for reasons attributable to the buyer (for example a wrong address, refusal of the parcel or failure to collect it), we reserve the right to charge the cost of the return transport and of any new delivery.
Products bought by consumers are covered by the 2-year legal guarantee of conformity. If a product is not in conformity, you are entitled to have it repaired or replaced free of charge or, in the cases provided by law, to a price reduction or a refund.
You may withdraw from your purchase without giving any reason within 14 calendar days of receiving the product. The direct cost of returning the product is borne by you. We refund all sums paid, including the cost of standard delivery, within 14 days of your notification; we may withhold the refund until we have received the product or proof that you have sent it.
Full details: Shipping, Warranty and Returns Policy. Questions? contact@ofm4x4.com or +40 730 333 666.
Related products
Air Clutch Lever for Grizzly Winch
Replacement air-actuated clutch lever for Grizzly electric winches. The clutch disengages the drum from the gearbox so rope can be pulled out freely by hand - the first step of almost every recovery, and a part that gets knocked and corroded more than most.
- Engages and disengages the drum from the gearbox
- Air actuated - no need to reach into the bumper
- Original-specification replacement
Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Universal Winch Mounting Plate for Grizzly 8500 lbs
Steel mounting plate for Grizzly 8500 lbs winches. A winch is only as strong as what it is bolted to: the plate spreads the pulling load across the chassis rails instead of concentrating it on a bumper, which is what bends bumpers and tears out mounting bolts.
- Spreads winch load across the chassis rather than the bumper
- Drilled for the 8500 lbs Grizzly bolt pattern
- Steel construction
Hexagonal Drive Shaft for Grizzly Winch – 9500 / 13000 lbs
Gearbox Support for Grizzly Winch – 8500 / 9500 / 13000 lbs
Replacement gearbox end support for Grizzly electric winches. This casting locates the planetary gearbox and carries the drum bearing at that end, so any play or damage here shows up immediately as drum wobble and uneven rope winding.
- Locates the planetary gearbox and drum bearing
- Original-specification replacement part
- Cures drum wobble caused by a worn or damaged support
Crossmember Support for Grizzly Winch – 9500 / 13000 lbs
Replacement crossmember support for Grizzly electric winches. The crossmember ties the motor end and gearbox end of the winch together and carries a share of the pulling load into the mounting plate, so a bent or cracked one should be replaced rather than straightened.
- Original-specification replacement part
- Ties the motor and gearbox housings together
- Transfers pulling load into the winch mounting plate
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset







Reviews
There are no reviews yet.