Grizzly Electric Winch 12,000 lbs 12V 72.5:1 – Synthetic Rope
583,00 €
Grizzly 12,000 lbs (5,454 kg) 12V electric recovery winch with a 72.5:1 planetary gearbox and synthetic rope.
- Capacity: 12,000 lbs (5,454 kg)
- Motor: 7.2 HP, 5.4 kW, 12V DC
- Rope: 9.5 mm x 24 m (Red)
- Gear ratio: 72.5:1
In stock
Grizzly 12,000 lbs 12V electric winch
This 12,000 lbs 12V winch is sized for full-size 4x4s and heavily loaded pick-ups. It ships with synthetic rope, so it is lighter to handle and far safer if the line ever fails.
Technical specification
- Pulling capacity: 12,000 lbs (5,454 kg)
- Synthetic rope: 9.5 mm x 24 m (Red)
- Motor: 7.2 HP, 5.4 kW, 12V DC
- Voltage: 12V
- Gearbox: 2-Stage Planetary Gear
- Gear ratio: 72.5:1
- Clutch: Manual Engage/Disengage
- Brake: Automatic
- Fairlead: Aluminum Hawse (Black)
- Drum size: 64 mm x 224 mm
- Dimensions: 623 mm x 174 mm x 222 mm
- Mounting bolt pattern: 254 mm x 114.3 mm
- Winch weight: 30 kg
- Warranty: 24 Months
Rope and fairlead
Synthetic rope stores almost no energy under tension, so if the line does part it drops rather than whipping back – a decisive safety advantage over steel. It is also light enough to pull out by hand and will not develop the sharp broken strands that make old steel cable dangerous to handle. Use it only with a hawse fairlead and keep it clear of hot surfaces.
Fitting
Mounting bolt pattern is 254 mm x 114.3 mm, so it fits winch plates and bumpers cut to that pattern. Feed the winch from the battery with correctly rated cable and a suitable isolator, and make sure the mounting plate is tied into the chassis rather than the bumper skin alone.
Operating advice
- Rig a snatch block for heavy or angled pulls – it roughly halves the load on the winch and the anchor
- Winch in short bursts and let the motor cool between pulls
- Keep at least five wraps of line on the drum at all times
- Never use a recovery winch to lift or suspend a load
| Weight | 38 kg |
|---|---|
| Dimensions | 62,3 × 17,4 × 22,2 cm |
| Brand | Grizzly Winch |
| Line Type | Synthetic Rope |
| Voltage | 12V |
| Gear Ratio | 72.5:1 |
| Pulling Capacity | 12000 lbs (5454 kg) |
| Motor Power | 7.2 HP |
| Length | 24 m |
| Line Diameter | 9.5 mm |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Red Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Anodised red aluminium hawse fairlead for winches running synthetic rope. The polished radius guides the rope onto the drum from any angle without the sharp edges or pinch points that shred synthetic line - which is exactly why roller fairleads must never be used with rope.
- Synthetic rope only - never fit synthetic rope to a roller fairlead
- Machined aluminium with a smooth radiused throat
- Red anodised finish
Universal Winch Mounting Plate for Grizzly 8500 lbs
Steel mounting plate for Grizzly 8500 lbs winches. A winch is only as strong as what it is bolted to: the plate spreads the pulling load across the chassis rails instead of concentrating it on a bumper, which is what bends bumpers and tears out mounting bolts.
- Spreads winch load across the chassis rather than the bumper
- Drilled for the 8500 lbs Grizzly bolt pattern
- Steel construction
Complete Control Box for Grizzly Winch – 8500 / 9500 / 13000 lbs
Complete replacement control box for Grizzly electric winches, supplied with the contactors and wiring already assembled. The control box is where water and corrosion do most of their damage: when a winch runs one way but not the other, or clicks without turning, a failed contactor inside this box is the usual cause.
- Complete assembled unit - contactors, wiring and housing
- Fixes the classic "runs one way only" winch fault
- Accepts both corded and wireless remote handsets
Crossmember Support for Grizzly Winch – 9500 / 13000 lbs
Replacement crossmember support for Grizzly electric winches. The crossmember ties the motor end and gearbox end of the winch together and carries a share of the pulling load into the mounting plate, so a bent or cracked one should be replaced rather than straightened.
- Original-specification replacement part
- Ties the motor and gearbox housings together
- Transfers pulling load into the winch mounting plate
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset
OFM4X4 Synthetic Winch Rope 12mm x 50m with Hook – Red, 10,500 kg
12 mm x 50 m UHMWPE synthetic winch rope with hook, in red. Six times lighter than steel cable, far safer if it fails, and easy to pull out to an anchor by hand.
- Size: 12 mm x 50 m
- Strength: 10,500 kg
- For winches: Off-road vehicle winches (10,000–20,000 lbs)
- Hook: Included
Use with a hawse fairlead only.
Reviews
There are no reviews yet.