Wheel Spacer 30mm 6×139.7 M12x1.5 CB67.1 with Centring Ring – L200>2005, Pajero Iii, Pajero IV
24,00 €
30mm duralumin wheel spacer, 6×139.7 bolt pattern, M12x1.5 thread and 67.1 mm centre bore, with centring ring. Widens the track and clears oversized off-road tyres.
- Thickness: 30mm
- PCD / CB: 6×139.7 / 67.1 mm
- Thread: M12x1.5
- Fits: L200>2005, Pajero Iii, Pajero IV
Price is per single piece.
In stock
Size and packaging guidelines
| Specification | Chair | Armchair | Sofas |
| Height | 37" | 42" | 42" |
| Width | 26.5" | 32.5" | 142" |
| Depth | 19.5" | 22.5" | 24.5" |
| Assembly Required | No | No | Yes |
| Packaging Type | Box | Box | Box |
| Package Weight | 55 lbs. | 64 lbs. | 180 lbs. |
| Packaging Dimensions | 27" x 26" x 39" | 45" x 35" x 24" | 46" x 142" x 25" |
Wheel spacer 30mm 6×139.7 M12x1.5
A 30mm duralumin wheel spacer for 6×139.7 hubs. Widening the track restores the planted feel a vehicle loses after a suspension lift, and buys the clearance needed to run oversized off-road tyres without fouling the suspension.
Technical specification
- Thickness: 30mm
- Bolt pattern (PCD): 6×139.7 mm
- Thread: M12x1.5
- Centre bore (CB): 67.1 mm
- Centring ring: Yes – included
- Material: Duralumin (aluminium alloy)
- Model: OFM 116
- Weight: 1.5 kg
- Supplied: Price is per single piece
Vehicle compatibility
Suits L200>2005, Pajero III, Pajero IV. Check your hub bolt pattern, thread and centre bore before ordering.
What a wheel spacer does
Fitting a spacer moves the wheel outboard by its thickness. That widens the track, which improves lateral stability, and it creates clearance between the tyre sidewall and the suspension, steering arms and chassis – the usual limit when moving to oversized off-road tyres after a lift.
Fitting and safety
Spacers must be fitted to clean, flat hub faces and the nuts torqued to the vehicle manufacturer’s specification, then re-checked after the first 50-100 km. The centring ring locates the wheel on the hub so the load is carried by the hub face rather than the studs. Fitting by a specialist 4×4 workshop is strongly recommended.
The price shown is for one piece. Order the quantity you need – most builds take four.
| Weight | 1,5 kg |
|---|---|
| Dimensions | 14 × 14 × 3 cm |
| Brand | OFM4X4 |
| Vehicle Compatibility | L200 (2005 onwards), Pajero III, Pajero IV |
| Material | Aluminium |
| Spacer Model | OFM116 |
| Centring Ring | Yes |
| Spacer Thickness | 30 mm |
| Thread Size | M12 x 1.5 |
| Centre Bore (CB) | 67.1 mm |
| Bolt Pattern (PCD) | 6 x 139.7 |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.