Crossmember Support for Grizzly Winch – 9500 / 13000 lbs
5,00 €
Replacement crossmember support for Grizzly electric winches. The crossmember ties the motor end and gearbox end of the winch together and carries a share of the pulling load into the mounting plate, so a bent or cracked one should be replaced rather than straightened.
- Original-specification replacement part
- Ties the motor and gearbox housings together
- Transfers pulling load into the winch mounting plate
In stock
Crossmember support bracket for Grizzly winches
Replacement crossmember support for Grizzly electric winches. The crossmember ties the motor end and gearbox end of the winch together and carries a share of the pulling load into the mounting plate, so a bent or cracked one should be replaced rather than straightened.
Key points
- Original-specification replacement part
- Ties the motor and gearbox housings together
- Transfers pulling load into the winch mounting plate
- Steel construction
Compatibility
Grizzly electric winches rated 9500 lbs and 13000 lbs.
Specification
- Part: Crossmember Support for Grizzly Winch – 9500 / 13000 lbs
- Weight: 0.2 kg
| Weight | 0,2 kg |
|---|
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Universal Winch Mounting Plate for Grizzly 9500 – 13000 lbs
Steel mounting plate for Grizzly winches from 9500 to 13000 lbs. At these capacities the mounting is what fails first if it is under-engineered - the plate spreads the load across the chassis rails so the pull is carried by the vehicle structure, not by bumper brackets.
- Rated for the heavier 9500-13000 lbs Grizzly winches
- Spreads pulling load across the chassis
- Steel construction
Red Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Anodised red aluminium hawse fairlead for winches running synthetic rope. The polished radius guides the rope onto the drum from any angle without the sharp edges or pinch points that shred synthetic line - which is exactly why roller fairleads must never be used with rope.
- Synthetic rope only - never fit synthetic rope to a roller fairlead
- Machined aluminium with a smooth radiused throat
- Red anodised finish
Air Clutch Lever for Grizzly Winch
Replacement air-actuated clutch lever for Grizzly electric winches. The clutch disengages the drum from the gearbox so rope can be pulled out freely by hand - the first step of almost every recovery, and a part that gets knocked and corroded more than most.
- Engages and disengages the drum from the gearbox
- Air actuated - no need to reach into the bumper
- Original-specification replacement
Grizzly Winch Corded Remote Control – 8500 / 9500 / 13000 lbs
Wired remote handset for Grizzly electric winches. A corded remote has no battery to go flat and no pairing to lose, which is why most operators keep one in the vehicle as a backup even when they normally use the wireless handset.
- Plugs directly into the winch control box
- No batteries and no radio pairing required
- Reliable backup if the wireless remote fails in the field
Grizzly Winch Wireless Remote Control – 8500 / 9500 / 13000 lbs
Replacement wireless remote handset and receiver for Grizzly electric winches. Operating the winch from outside the danger zone is the single biggest safety improvement you can make to a recovery - you can stand clear of the line, watch the anchor and the drum, and stop the moment something looks wrong.
- Operates winch in and winch out without a trailing cable
- Lets the operator stand well clear of a loaded line
- Direct replacement for the original Grizzly handset
