OFM4X4 Air Compressor 160L/min 12V – 150 PSI for 35″+ Tyres
95,00 €
A high-volume 12V compressor built for large off-road tyres. At 160 L/min it will re-inflate a set of 35-inch tyres in a realistic amount of time, where a small emergency pump would still be running an hour later.
- Airflow: 160 L/min
- Power supply: 12V DC, permanent magnet motor
- Current consumption: 40 A
- Maximum pressure: 150 PSI / 10 bar (120 PSI / 8 bar operating)
In stock
OFM4X4 160 L/min 12V air compressor
A high-volume 12V compressor built for large off-road tyres. At 160 L/min it will re-inflate a set of 35-inch tyres in a realistic amount of time, where a small emergency pump would still be running an hour later. It also has the capacity to supply a vehicle air system.
Technical specification
- Airflow: 160 L/min
- Power supply: 12V DC, permanent magnet motor
- Current consumption: 40 A
- Maximum pressure: 150 PSI / 10 bar (120 PSI / 8 bar operating)
- Operating temperature: -55°C to 60°C
- Maximum run time: 40 minutes at 40 PSI working pressure at 24°C ambient
- Recommended duty cycle: 20 minutes on / 30 minutes rest
- Base: 29.5 x 13.5 cm
- Height: 24 cm
- Length: 32 cm
What’s included
- Compressor with built-in air intake filter
- 7 m quick-release coiled air hose with pressure gauge
- 2 m battery connection cables with protective cap
- Safety valve and overload current protection
Recommended use
Recommended for inflating tyres over 35 inches and for supplying a vehicle pressure system. Respect the duty cycle – 20 minutes of running followed by 30 minutes of rest – to avoid overheating the motor on a full four-tyre re-inflation.
| Weight | 9,2 kg |
|---|---|
| Dimensions | 32 × 13,5 × 24 cm |
| Brand | OFM4X4 |
| Product Type | Air Compressor |
| Voltage | 12V |
| Airflow | 160 l/min |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Red Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Anodised red aluminium hawse fairlead for winches running synthetic rope. The polished radius guides the rope onto the drum from any angle without the sharp edges or pinch points that shred synthetic line - which is exactly why roller fairleads must never be used with rope.
- Synthetic rope only - never fit synthetic rope to a roller fairlead
- Machined aluminium with a smooth radiused throat
- Red anodised finish
OFM4X4 Snatch Block Pulley 8T – Winch Recovery Pulley
OFM4X4 Tree Saver Strap 3m x 7.5cm – 12T Winch Anchor Strap
OFM4X4 Bow Shackle 3.25T – Rated Steel Recovery Shackle
TRE 4×4 TR102 Air Locking Differential – Rear axle, 27 Spline – Jeep
TRE 4×4 TR100 Air Locking Differential – Rear axle, 27 Spline – Jeep
OFM4X4 Hi-Lift Farm Jack 48″ (120 cm)
OFM4X4 Synthetic Winch Rope 10mm x 28m with Hook – Blue, 10,500 kg
10 mm x 28 m UHMWPE synthetic winch rope with hook, in blue. Six times lighter than steel cable, far safer if it fails, and easy to pull out to an anchor by hand.
- Size: 10 mm x 28 m
- Strength: 10,500 kg
- For winches: For Auto Off-Road winches with a capacity of 9,500–13,000 lbs
- Hook: Included
Use with a hawse fairlead only.







Reviews
There are no reviews yet.