Grizzly Electric Winch 13,000 lbs 12V 180:1 – Steel Cable
290,00 €
Grizzly 13,000 lbs (5,897 kg) 12V electric recovery winch with a 180:1 planetary gearbox and steel cable.
- Capacity: 13,000 lbs (5,897 kg)
- Motor: 6.5 HP, 4.8 kW, 12V DC
- Cable: 25m x Ø 9.5 mm
- Gear ratio: 180:1
- Remote: Wired and Wireless
Out of stock
Grizzly 13,000 lbs 12V electric winch
A 13,000 lbs 12V recovery winch built for real off-road work. The 180:1 three-stage planetary gearbox delivers heavy pulling power from a compact housing, and the automatic brake holds the load whenever the motor stops.
Technical specification
- Pulling capacity: 13,000 lbs (5,897 kg)
- Steel cable: 25m x Ø 9.5 mm
- Motor: 6.5 HP, 4.8 kW, 12V DC
- Voltage: 12V
- Gearbox: 3-Stage Planetary Gear
- Gear ratio: 180:1
- Clutch: Manual Engage/Disengage
- Brake: Automatic
- Fairlead: Steel Rollers
- Remote control: Wired and Wireless
- Dimensions: 546 mm x 160 mm x 222 mm
- Mounting bolt pattern: 254 mm x 114.3 mm
- Maximum line load: 5,897 kg
- Ingress protection: IP68 – Fully protected against dust and water.
- Winch weight: 38 kg
- Warranty: 24 Months
Rope and fairlead
Galvanised steel cable is highly abrasion resistant and shrugs off dragging over rock and gravel. It stores significant energy under tension, so always lay a damper over the line during a pull and never step over a loaded cable. Wear gloves – used cable develops sharp broken strands.
Fitting
Mounting bolt pattern is 254 mm x 114.3 mm, so it fits winch plates and bumpers cut to that pattern. Feed the winch from the battery with correctly rated cable and a suitable isolator, and make sure the mounting plate is tied into the chassis rather than the bumper skin alone.
Operating advice
- Rig a snatch block for heavy or angled pulls – it roughly halves the load on the winch and the anchor
- Winch in short bursts and let the motor cool between pulls
- Keep at least five wraps of line on the drum at all times
- Never use a recovery winch to lift or suspend a load
| Weight | 38 kg |
|---|---|
| Dimensions | 54,6 × 16 × 22,2 cm |
| Brand | Grizzly Winch |
| Line Type | Steel Cable |
| Voltage | 12V |
| Gear Ratio | 180:1 |
| Pulling Capacity | 13000 lbs (5897 kg) |
| Motor Power | 6.5 HP |
| Length | 25 m |
| Line Diameter | 9.5 mm |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Machined aluminium hawse fairlead for winches running synthetic rope. The smooth radiused throat lets the rope feed onto the drum from any angle without chafing, and there are no rollers, bearings or pinch points to wear out or seize with mud.
- Synthetic rope only - not suitable for steel cable
- Machined aluminium with a smooth radiused throat
- No moving parts to seize or wear
Roller Fairlead for Grizzly Winch – Steel Cable, 254mm Centres
Four-way steel roller fairlead for winches running steel cable. The rollers let the cable enter at a sharp angle without dragging over a fixed edge, which protects both the cable and the winch drum during off-centre pulls - the norm rather than the exception in real recoveries.
- For steel cable only - do not use with synthetic rope
- Four rollers handle side, up and down pull angles
- Steel construction
Universal Winch Mounting Plate for Grizzly 9500 – 13000 lbs
Steel mounting plate for Grizzly winches from 9500 to 13000 lbs. At these capacities the mounting is what fails first if it is under-engineered - the plate spreads the load across the chassis rails so the pull is carried by the vehicle structure, not by bumper brackets.
- Rated for the heavier 9500-13000 lbs Grizzly winches
- Spreads pulling load across the chassis
- Steel construction
Red Aluminium Hawse Fairlead 25cm – Synthetic Winch Rope
Anodised red aluminium hawse fairlead for winches running synthetic rope. The polished radius guides the rope onto the drum from any angle without the sharp edges or pinch points that shred synthetic line - which is exactly why roller fairleads must never be used with rope.
- Synthetic rope only - never fit synthetic rope to a roller fairlead
- Machined aluminium with a smooth radiused throat
- Red anodised finish
Universal Winch Mounting Plate for Grizzly 8500 lbs
Steel mounting plate for Grizzly 8500 lbs winches. A winch is only as strong as what it is bolted to: the plate spreads the pulling load across the chassis rails instead of concentrating it on a bumper, which is what bends bumpers and tears out mounting bolts.
- Spreads winch load across the chassis rather than the bumper
- Drilled for the 8500 lbs Grizzly bolt pattern
- Steel construction
Reviews
There are no reviews yet.